AMOS Motion Flow is a DMX / Art-Net controller for kinetic lighting: rings of winch-driven light fixtures that rise, fall and change colour together. Pick a motion, a light effect and a colour scheme, and see every fixture live on screen while the rig follows.
Part of AMOS DMX SystemsNo demo effect matches. The app has 30.
An interactive browser preview of a two-ring kinetic installation. Try an effect, a colour scheme or a zone.
Motion effects set every fixture's cable length. Light effects set its colour. Mix any motion with any light effect and colour scheme, and change them while the show is running.
Every motion combines with any light effect and colour scheme. Try 18 of them in the live visualiser.
Type a few letters to filter the motion list, then click to switch the running effect.
A separate resting height for the outer and the inner ring, plus amplitude and speed for the motion.
Red, green, blue and white faders, a brightness master, and Color 1 / Color 2 picked from a colour picker.
Send the colour to All, to the Main RGBW channels or to the Rings (aux) channels of each fixture.
Light effects run on their own speed, and spacing sets how far a chase, wipe or rainbow spreads across the fixtures.
Each cable eases toward its target for smooth physical movement, with fine position control.
The outer ring is Universe 1 and the inner ring is Universe 2. Motion Flow drives both DMX512 universes over an Art-Net network or through two USB-DMX interfaces.
Art-Net network output, broadcast to the whole network or sent to one target IP. Each ring has its own Art-Net universe.
One USB-DMX interface per universe. Choose the port and the protocol for each one, list the available ports and connect from the app.
Set how many fixtures hang on each ring. The patch and the live view rebuild around the new layout.
Match the channel footprint of your fixtures. Start addresses follow automatically.
Tell the app how far your winches can travel. Heights and amplitude stay inside that limit, and settings apply while the app runs.
Capture what is on stage as a cue, line the cues up, give each one a hold and a fade time, and let the cuelist run on its own.
| # | Cue name | Motion | Hold | Fade |
|---|---|---|---|---|
| 1 | Opening tide | Wave | 8.0s | 3.0s |
| 2 | Spiral rise | Spiral | 6.0s | 2.0s |
| 3 | Vortex | Vortex | 6.0s | 2.0s |
| 4 | Gold pendulum | Pendulum | 5.0s | 2.0s |
| 5 | DNA finale | DNA | 10.0s | 4.0s |
Describe any kinetic fixture as a profile, apply it to the session, and Motion Flow works out which channels it drives. Everything else turns into a manual fader.
| Name | Type | Colour |
|---|---|---|
| Dimmer | intensity | – |
| Cable Length | position | – |
| Speed | speed | – |
| Red | color | red |
| Blue | color | blue |
| Green | color | green |
| White | color | white |
| Color Effect | effect | – |
| Aux Red | color | red |
| Aux Blue | color | blue |
| Aux Green | color | green |
| Aux White | color | white |
| Aux Dimmer | intensity | – |
| Aux Color Effect | effect | – |
| Reset | maintenance | – |
Four steps, all in one Windows app.
Build the fixture profile from the Defaults template or load an existing one, then apply it to the session.
Set the fixtures per ring, their footprint and cable travel, choose Art-Net or USB-DMX output, and export the patch list.
Pick a motion, a light effect and a colour scheme, capture the look as a cue and set its hold and fade times.
Play the cuelist, loop it for all-day installations, and save the complete show to reload any time.
For lighting designers, integrators, venues and event teams working with winch-driven kinetic rigs.
AMOS Motion Flow is not sold off the shelf. Tell us about your rig and we will show it running and arrange the software for your project.
Number of fixtures per ring, channels per fixture, cable travel, and whether you output over Art-Net or USB-DMX.
We run Motion Flow with a layout close to yours: effects, cues and the live view.
The Windows app for your project, with support by email at support@amolvin.com.
Write to us by email or on WhatsApp to request a demo or the software.
support@amolvin.com · Part of the AMOLVIN ecosystem